3" Exhaust Gaskets

Apollyon12

Apollyon12

Active member
Does anybody have two 3" exhaust gaskets? And possibly a turbo-to-downpipe gasket?

Bought a used exhaust that didn't come with any gaskets or hardware. If nobody does, I'll have to order them online.

 
should be able to find the 3" one at any exhaust place. as for the downpipe-turbo one, evergreen should be able to hook you up pretty cheap

 
All the local parts stores don't have the correct gasket with the right holes/size. The closest they have is a 3 1/8" which is about 1/2" too large on the outside. I wouls have to modify it to get it to fit and I want to stick with the correct stuff if I am going to have to swap exhaust on a semi-regular basis.

Hadn't thought about checking the dealers, I can't imagine that the would have the right 3". I am willing to bet that the gasket that's on the car will work just fine but I want to have a backup just in case, so a dealer would be the perfect place to keep it...

 
another option is go to say an autozone, or such, and ask if you can dig through their gasket box out back. i found a couple that way too.

 
NEAD should have them. obviously a bit of a drive for you, but not terrible. otherwise i either mod a napa gasket or order online

 
should be able to find the 3" one at any exhaust place. as for the downpipe-turbo one, evergreen should be able to hook you up pretty cheap
Click to expand...
OEM gaskets are NOT cheap! I recently bought some for my up/dp install and the DP to turbo gasket was about $30... but OEM is really the only way to go for gaskets.

Anyway, I've got some non-OEM gaskets. I've got the 3" one and a turbo to dp one... will let go for real cheap if you want them.

 
I need two (2) 3" ones. Do you have more than one?

I am going to skip the turbo-to-dp one because Patriot has two in stock ($22.72). I did place an order through FaxtWRX.Com this morning but I can always cancel. Do you ever get down to portland or Biddeford? Topsham is a hike for two $7 gaskets. I wouldn't be surprise to find that it would cost me more in gas to drive up there than get them shipped online.

 
I've got:

3" gasket

Up pipe to turbo

Up pipe to header

Used OEM DP to turbo

So only got one 3"...

I drive to Portland on Tuesdays for class... I have class down there from 550-9pm

 
I had a similar situation. I got truck exhaust gaskets from Autobone which were WAY too big, then cut them to fit. I also got staineless hardware there too.

Seems to be holding up pretty well, and it was cheaper than the performance gaskets.

 
You must log in or register to reply here.
Back
Top