Clutch Issue

  • Thread starter Thread starter 02 WRX Chris
  • Start date Start date
0

02 WRX Chris

Guest
Hey guys. Need some input on this. Ive ha this problem on and off for a little while now and the other night it happened again. I got on it coming around a traffic circle and go up to about 80ish. When doing this, it seems like my clutch pedal has NO resistance till I get about 3/4 pushed down. When driving normal it is fine, it has resistance about 1/8-1/4 when being pushed. What could this be??? Bad slave cylinder?? Master????

 
Possibly a bad slave or master. I'd give it a good flush and rebleed the system. See what that does. Then if the problem doesn't go away, go for slave, then master.

 
Last edited by a moderator:
And now my clutch slips under lots of power after 4k RPM, and the pedal goes away until I get off it. Well....time to take it to mike and replace the Master and slave in 1 shot. I can get both for like 80 bucks at work so It wouldn't hurt to change both.

 
And heard back from Mike today. Clutch is toast. I bought it less than a year ago and has under 15k miles. Sent competition clutch a message to see if they can do anything about it. The clutch should have lasted WAY long than that!

 
U are the third bad competition clutch I know of to fail premature..........

 
Last edited by a moderator:
Well...they only have a 90 day warranty and won't do raisin for me....this freaking blows. Never buying that brand clutch again. Ordered a ACT clutch disk so replace messed up one. I hope this one lasts more than 9 month and more than 10,000 miles!

 
You must log in or register to reply here.
Back
Top