You cut the stock turbo inlet hose out and remove the leaky line. Cut the little metal strap holding the 2 steel lines that lead to the injectors. File the nub that is left on the steel line. Take a longer piece of 5/16" fuel injection hose and slide it on the rear section of line. Then pull it back and slide it up over the nub on the front line. Clamp the front part of the line past the nub, just before the bend. Then install a new squishy silicone inlet hose you bought off E-Bay for $100. No need to remove the intake this way. I did mine in about 1 hour, learning as I went.
So, at Patriot it may be tough if they don't have, or want to deal, with the silicone hose. But it fixes the problem for a hellofa lot less time and headache.