apkarian100
Vendor
Clutch install is finished! We ran into a couple bumps in the road getting the engine in and out, but we were finally able to button it back up in the end.
Things I noticed about the old clutch:
1. Flywheel had heat cracks and was pretty worn.
2. Clutch disc wasn't in too bad on shape but was getting down there.
3. Pilot bearing felt gritty and not smooth at all.
4. Pressure plate didn't appear to be in that bad of shape. It still had plenty of force before I removed it.
Pics:
(Don't worry about the alignment tool be misalign. It was fixed shortly after the pic was taken)
Heyo!
Old clutch:
Things I noticed about the old clutch:
1. Flywheel had heat cracks and was pretty worn.
2. Clutch disc wasn't in too bad on shape but was getting down there.
3. Pilot bearing felt gritty and not smooth at all.
4. Pressure plate didn't appear to be in that bad of shape. It still had plenty of force before I removed it.
Pics:
(Don't worry about the alignment tool be misalign. It was fixed shortly after the pic was taken)
Heyo!
Old clutch:
Last edited by a moderator: